Table Storage Bracket Set Installation

DOWNLOAD INSTRUCTIONS HERE

Table Storage Bracket Set Installation Instructions

Here, we provide detailed setup instructions for the Table Storage Bracket Sets, a versatile solution designed to securely store your Swing-Out Table when not in use. By following these steps, you will ensure your table remains safely tucked away, creating more space in your van and maintaining an organised, clutter-free environment.

INCLUDED IN KIT

2 x Brackets

2 x Clips

6 x Screws (small)

4 x Screws (large)

TOOLS REQUIRED

Electric Screwdriver

Spirit Level

1. Position the tabletop in the centre of the back panel. We estimate it to be about 23.5cm from the right-hand side; however, this could differ depending on your table or unit size. We advise using a spirit level to ensure it’s straight.
2. Position the brackets on the bottom edge with the table held in place.
3. Use a screwdriver to mark through the circular holes of the brackets and drill holes into the Switch for screws. Then attach brackets to the Switch using the six smaller screws.
4. Use the brackets to hold the tabletop in place and mark where the clips will be attached using a screwdriver. Make the holes and attach the clips with the four bigger screws.
5. Once secure, open the top clips to store the tabletop