Switch removal | T5 & T6

These instructions will apply to the Ovano Switch Narrow but also work for the Ovano Switch XL.

1. Initial step: Remove the rear legs of the Switch.
2. Move to the side of the transporter van.
3. Unscrew the 12 screws from the hinges in the bulkhead.
4. The bulkhead will then lift out.
5. Remove four allen head bolts from the top of the unit.
6. Fold up the four sections for removal along with the rope.
7. Pull out the drawer and remove two rearmost bolts at the back.
8. When removing the two remaining bolts, close the drawer to prevent it from falling.
9. Remove the remaining two bolts to lift out the entire base unit as one piece.
10. The Ovano Switch is now entirely removed without a trace.